Daikin iLINQ Room Terminal

 

The iLINQ Room Terminal application is designed to support single zone light commercial packaged rooftop units with iLINQ Controllers installed. The room terminal provides the following features.

ilinqrt

FEATURES

  • Touch screen user interface
  • Onboard temperature and humidity sensor
  • Space CO2 monitoring using optional sensor
  • Temperature setpoint adjust
  • Occupancy override
  • Onboard LED for unit status and alarm feedback
  • Wi-Fi hotspot
  • Live and historic trending
  • iLINQ controller onboard LCD display emulator
  • Monitoring of up to 10 iLINQ RTUs via iLINQ Network

The room terminal includes an onboard temperature and humidity sensor and is intended to serve as the iLINQ controller’s source of space temperature and humidity. The room terminal transmits and receives data to and from the iLINQ controller via 3-wire serial communication. The space temperature and humidity is included in this data transmission. For this reason, the room terminal installation location should be carefully selected in the space served by the RTU. The iLINQ controller must be configured to use the space temperature and humidity from the room display. The iLINQ service password will be needed for this operation. If the Wi-Fi hotspot feature is utilized, an Ethernet connection between the room terminal and the iLINQ controller is required, otherwise, the connection can be omitted.
The power supply provided with the room terminal provides the 24VDC power circuit needed to operate the room terminal. The power supply is field installed in the RTU’s control box and converts the existing 24VAC to 24VDC.

LC Thermostats